TL;DR
Get pool and patio gear delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
A Hunker report highlights a DIY window treatment made from chains of buttons linked with jewelry jump rings and hung from a rod. Its creator estimated the project took 35–40 hours and cost about $90–$100; it is decorative, not a substitute for curtains or blinds when privacy or light control is needed.
A DIY button curtain made from hundreds of linked buttons is drawing attention as a decorative alternative to basic curtains, according to a Hunker report about TikTok creator @girl.create_. The project turns buttons into hanging strands, but its creator’s reported 35–40 hours of work and limited ability to block light or provide privacy make it better suited to decoration than as a practical replacement for blinds or fabric panels.
The method uses buttons connected with jewelry jump rings to form long chains, which are then hung from a suspension rod. The creator’s materials list included between 500 and 1,000 buttons, 20-millimeter and 8-millimeter jump rings, needle-nose and flat-nose pliers, and a rod capable of supporting the finished piece. Hunker reported that the creator put the cost at roughly $90 to $100.
To make a strand, the report says to twist the ends of a jump ring sideways in opposite directions, rather than pulling them apart, which can deform the ring. The button is slipped on before the ends are twisted back together. The finished strands slide onto the rod. Hunker advises choosing rings with sufficiently thick wire for the weight of the project and checking button assortments carefully: some buttons have holes on the back that may not work with this method.
The design can be adjusted through button color, material, strand length and spacing. Hunker describes options including a color gradient, vintage buttons, wooden or tortoiseshell styles, and full-length strands or shorter café-style arrangements. Tighter spacing can affect how much light passes through, but the report cautions that the strands will not offer much privacy or sunlight reduction. A sheer panel or blind behind the installation can address those needs.
A Decorative Treatment, Not a Privacy Screen
The project offers homeowners and renters a way to make a window a focal point without relying on conventional fabric panels. Because the strands are individually assembled, the maker can tailor the color, texture and length to a room. Hunker characterizes the finished piece as sitting between a window treatment and an art installation, rather than functioning like a standard curtain.
That distinction matters before anyone commits the time and materials. The creator’s estimate of 35–40 hours makes this a substantial craft project, and the reported cost is not necessarily a universal price: materials and availability may vary. More importantly, decorative button chains leave gaps. People who need reliable privacy, reduced glare or meaningful sunlight control should plan for a separate blind or curtain rather than assume the strands will do the job.
As an affiliate, we earn on qualifying purchases.
The idea addresses a specific decorating preference: adding personality to a window when reducing light is not the main goal. In the Hunker report, the creator demonstrates linking buttons with jump rings and suspending the resulting chains from a rod. This is a different approach from hanging a continuous fabric panel, and the open strands allow light to pass between them.
The report presents the project as one that can be completed gradually, rather than as a quick weekend fix. Its practical requirements include a large supply of compatible buttons, rings sturdy enough for the finished weight, pliers and a suitable rod. Design choices also affect the result: strand length changes the silhouette, while spacing influences the appearance and amount of light filtering through.
“The project took 35 to 40 hours and cost roughly $90 to $100.”
— TikTok creator @girl.create_, as quoted in Hunker
As an affiliate, we earn on qualifying purchases.
Questions About Cost and Performance
The report does not provide a tested measure of how much light the finished curtain blocks, how much privacy different strand spacings offer, or how well the installation holds up over time. It also does not establish whether the reported cost includes every possible tool or reflects prices available to other buyers. The $90–$100 figure is the creator’s estimate, not a fixed price for the project.
Suitability will depend on the window, the rod and the weight of the assembled strands. The source advises using a rod that can support the project but does not give a load rating or installation specifications. Makers should check the hardware and window setup for their own conditions before hanging a heavy arrangement.
As an affiliate, we earn on qualifying purchases.
Plan the Materials Before Assembly
Anyone considering the craft can start by checking that the buttons have holes compatible with jump rings, then choose ring sizes and wire strength appropriate to the planned strands. The creator’s reported materials list gives a rough starting point, but the number of buttons will depend on the window’s width, desired coverage and strand spacing. A sturdier rod should be selected to carry the finished weight.
Before making the full curtain, a small test strand can help confirm that the buttons and rings fit together and that the spacing provides the intended look. For rooms where privacy or light control is needed, the next practical step is to plan for a blind or fabric layer behind the decorative chains. The Hunker report does not identify a formal product launch or a follow-up milestone; the development described is a creator-led DIY idea.
As an affiliate, we earn on qualifying purchases.
Key Questions
What is a button curtain?
It is a decorative window covering made by linking buttons into long strands with jewelry jump rings and hanging them from a rod.
How long and how much did the reported project take?
Creator @girl.create_ estimated 35–40 hours and about $90–$100. Those figures are the creator’s estimates, not a guaranteed time or price for every version.
Does a button curtain provide privacy or block sunlight?
Not much, according to Hunker. The open strands let light pass through and are not presented as a substitute for a conventional curtain or blind. A separate layer may be needed where privacy or stronger light control matters.
What materials are needed?
The reported list includes 500–1,000 buttons, 20-millimeter and 8-millimeter jump rings, needle-nose and flat-nose pliers, and a rod that can support the finished curtain. Button and ring compatibility should be checked before assembly.
Can the design be customized?
Yes. The report describes changing the colors, using vintage or textured buttons, varying strand lengths and adjusting the spacing. These choices affect the look and how much light passes through, but do not make the design a dependable privacy covering.
Source: rss
Halloween Picks
halloween
As an affiliate, we earn on qualifying purchases.
